Since Jan. 2014
Changing over from a Chlorinated Solvent to nPB or nPB to any other NEW solvent like:
Enviro Tech's Ensolv NEXT
Whenever solvent types are changed, a complete Clean-Out/Neutralization should be done on your degreaser to prevent cross contamination. Most solvents have very different molecular make-up and do not mix well, even in minuscule amounts.
Each solvent has different boiling points, so all temperature controls will need adjusted to allow the degreaser to operate properly.
Vapor Level Safety Control
Vapor Level Cycling Control
Boiling Chamber Clean-out
Vapor Up Thermostat
The technicians at Power-Kleen have converted many degreasers from one solvent to another with a
100% Success Rate!